June 23 - International Olympic Day.
16 documents in the field of Olympic sports came into force for the first time in early June 2020.
Briefly about some of them.
GOST R 58707-2019, Electronic scoreboards for volleyball, basketball, football, handball with a protective screen. Technical requirements and test methods.
The display design shall include at least one or more panels, communication controller, power supply, housing, grounding and lightning protection elements. The size of the characters should be such that the viewers at the most distant places from the scoreboard can read them. Brightness, clarity and contrast also affect the readability of information. Climatic design of the scoreboard should be appropriate to the type of sports facility.
GOST R 58708-2019, Gyms, sports and multipurpose halls. Two-part division curtains. Technical requirements.
The technical requirements of the curtains described in this document are used to divide the universal gyms into separate areas so that it is possible to conduct classes in different sports at the same time. They create a spatial, sound and color insulation of these areas.
The standard applies to lift curtains that fold or assemble in the ceiling area, with electric drive.
The curtains are made with a solid, mesh or combined fabric.
The design of the curtain shall ensure smooth lifting and lowering of the blade with the speed not exceeding 0.15 m/s, exclude the possibility of uncontrolled lifting and lowering of the blade, stopping and holding the blade at any height during the interruption of lifting and lowering. The inertial movement of the curtain web shall not exceed 50 mm.
GOST R 58681-2019, Athletic jumping stands. Technical requirements and test methods. Athletic jumping bollards are used to develop strength in a specific muscle group during exercise. The standard specifies technical requirements and test methods for these products.
The corners and edges of the bollards shall have a radius of curvature of no more than 3 mm. The upper platform of the bollards shall have an anti-slip carpet or rubber coating. The design of the bollards shall be stable and shall be able to withstand vertical and impact loads without damage or weakening of the connections.
If a horizontal force is applied to the bollard, which is 20% of its own weight, the bollard must be stable, any parts of the bollard must not be separated.
The documents are developed by "STANDARTINFORM".